Cutting Pick

 Application Of Cutting Pick：

The cutting pick is mainly used for tunneling of coal mining and tunneling, tunnel and ground trenching.
Installed on shearer, roadheader, milling machine and other equipment.

 Main Model：

U82.U84.U85.U92.U94.U95.U62.U47.U138.U765.U170.S100.S120.S135.S150S160.S170.S200.5030.C31.Special models can be produced quantitatively.
（The type of the cutting pick is mainly based on the hardness of the coal and the type of the gear rack.）

 Application Of Shovel Cutting Pick：

The cutting pick is mainly used for tunneling of coal mining and tunneling, tunnel and ground trenching.
Installed on shearer, roadheader, milling machine and other equipment.
It also can be used for coal mining of shearer drum.

 Advantages Of Shovel Cutting Pick For Sale

1. Long service life，it’s 1-1.5 times the old cutting pick.
2. High efficiency, it’s 2.5 times the ole cutting pick.
3. Energy conservation：The replacement time is short, the parking time is shortened, and the mining cost is reduced.
4. ABT as a drill bit supplier, the cutting pick we provided will serve in a more energy-efficient and stable way.

 Coal Cutting Yield And Quality Standard:

A. Cone hardness：HRC＞65；
B. Pick rod hardness：HRC28°-32°；
C. Surface hardness：HV＞2000；The cutting pick adopts special heat treatment technology，and the hardness reaches 40-45 degrees，basically no oxidation on the surface.

 

 Specification Of Shovel Cutting Pick For Sale

Model	Pick Length	Tip Length	Model	Pick Length	Tip Length
U47	144-152mm	68-80mm	TS36	167mm	89mm
U76	131mm	65mm	TS41	141mm	64mm
U82	152mm	80mm	T18	154mm	76mm
U84	143-162mm	70-86mm	T19	141mm	64mm
U85	160mm	84mm	S100	145mm	78mm
U92	196mm	102mm	S150	153.5mm	78mm
U94	185mm	89mm	S160	152mm	75mm
U95	180-184mm	87-89mm	C35R	142mm	65mm
U120	142mm	68mm	C31HD	118mm	61mm
U135	156mm	80mm	DS04	120mm	69mm
U150	153mm	78mm	RC25	87.8mm	48.8mm
U170	223mm	89mm	RP28	87.5mm	48.5mm
TS30	154mm	76mm	W6HR	88mm	49mm