ZGYX-454 Combined Drill Rig

One diesel engine drives both the screw air compressor and the hydraulic system, and the power output is a stagger peak design.
Compared to separated dril rig,the total power output of the diesel engine is reduced by about 35%, and the maintenance cost is reduced by 50%.Lower energy consumption,faster rock drilling speed,shorter preparation time and the less hole numbers reduce the unit energy consumption sharply.


Product Advantages Of ZGYX-454 Combined Drill Rig:

1. Cab
Spacious, open-minded, ergonomic cab with emphasis on safety and front window protection fence.
2. Double cycloid motor
Rotation unit driven by double cycloid motor, the output torque is large, the failure rate is very low.
3. Disc Automatic lever changer
Disc automatic lever changer, can freely select the drill pipe, prolong the tool life.
Patented floating-type reel eliminates tubing deformation and extends service life.
4. feed beam
Cylinder wire rope propulsion, high propulsion control accuracy, smooth turning head operation, can drill various intermediate angle holes and horizontal foot hole.
5. Dust Removal device
Two level dust removal technology leading industry. Dust cleaning and filtering area is large, automatic continuous self cleaning dust removal. The filter element array can be easily disassembled and maintained with high efficiency; the integrated cover can slide up and down, and the opening can be clearly observed and controlled.
6. Powerful traction
Crawler type heavy-duty chassis, crawler frame hydraulic swing device swing frame.


Specification Of ZGYX-454 Combined Drill Rig
Suggest Hole range
Hole range φ110-152mm
Hammer 4″/5″
Rod changer
#S of rods stored 6+1
Diameter 89/102mm
Length 4M
Hole depth 28M
Hydraulic Rotation Head
Rotation speed 0-105rpm
Max. Rotation torque 4,310Nm
Rated power 266KW @ 1,850
Emission level 国3
Fuel Tank
Capacity 480L
Air compressor
Max. Work pressure 20 Bar
Displacement 18m3/min
Boom type High stength single straight boom
Feed Chain & cylinder
Total Length 8,100mm
Feed travel 4,600mm
Feed extension 1,200mm
Max. Feed speed 0.88m/s
Max. Feed force 34.5kN
Max. Pull up force 67.6kN
Max. Walk speed 3km/h
Max. Traction force 117.7kN
Gradient 30º(≧20º,Best use winch)
Track frame oscillation ±10º
Ground clearance 420mm
Dimension(No Option)about
Weight 21,000kg
W 2,500mm
L 10,260mm
H 3,280mm



成为第一个“ZGYX-454 Combined Drill Rig” 的评价者

您的电子邮箱地址不会被公开。 必填项已用*标注